Show simple item record

dc.contributor.authorBonifacio, Alysson Larsen
dc.contributor.authorArchbold, Paul
dc.date.accessioned2022-04-28T15:40:37Z
dc.date.available2022-04-28T15:40:37Z
dc.date.copyright2022
dc.date.issued2022-04-01
dc.identifier.citationBonfacio, A.L., Archbold, P. (2022). The effect of calcination conditions on oat husk ash pozzolanic activity. Materials Today: Proceedings. 1 April 2022. https://doi.org/10.1016/j.matpr.2022.03.197en_US
dc.identifier.issn1369-7021
dc.identifier.urihttp://research.thea.ie/handle/20.500.12065/3959
dc.description.abstractSupplementary cementitious materials (SCMs) are known and used to reduce cement consumption, but some waste sources currently used for partial cement replacement are threatened by changing industrial production processes and local availability. Thus, considering possible sources of amorphous silica for use as SCM, especially pozzolans, there is an opportunity to investigate the use of agricultural residues such as oat husks, which currently have little or no commercial value. This work aims (i) to identify the burn ing temperature that promotes the reduction of carbon content and increase the amorphous material, (ii) to present the chemical and physical characterization analysis results, and (iii) to evaluate the pozzolanic potential of selected oats husks ashes (OHA) produced under controlled calcination temperatures. Local samples of oat husks were sun-dried, sieved, and split into two portions. One portion was subjected to analysis of moisture content, and the second portion was pre-calcined at 350 C for 2 h in an aerated lab oratory oven and turned into ashes under 400 to 700 C respectively, using ramp heating rate of 10 C/ min. The ashes were ground in a ball mill and subjected to chemical and physical analysis, considering Loss on Ignition (LOI) at 950 C, chemical composition through Energy Dispersive X-Ray Analysis (EDX), structural state analysis by X-ray diffraction (XRD), morphology by digital microscopy, density using glass pycnometer and chemical reactivity with calcium hydroxide measured through thermogravi metric analysis of a control mortar defined as (R3 ) model paste. The results show that the ash chosen for pozzolanic potential analysis, produced at 600 C, shows an average ash content value of 3.6%, and chem ical concentration of 45.97% oxygen (O), 21.2% silicon (Si), and 16.91% potassium (P), in addition to evi dence that characterizes crystallization of its structure and consumption of 8.74% of Ca(OH)2 from the control matrix, indicating low pozzolanic activity. It was concluded that local oat husks in Ireland calci nated between 600 and 700 C presented a favorable balance between the percentage of residual carbon amount and silica in the amorphous form that is favorable to react with calcium hydroxide forming cal cium silicate hydrate. It opens up a possibility of investigating the use of OHA as SCM, requiring more studies about the oats husks calcination time, cement replacement rate, and performance tests to con sider practical applications, and maybe contributing to reducing the OPC consumption, production neces sity, and consequently, the environmental issue caused by its production.en_US
dc.formatPDFen_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.relation.ispartofMaterials Today: Proceedingsen_US
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectOat husk ashen_US
dc.subjectPozzolanen_US
dc.subjectPortland cementen_US
dc.subjectCalcium hydroxideen_US
dc.titleThe effect of calcination conditions on oat husk ash pozzolanic activityen_US
dc.typeinfo:eu-repo/semantics/articleen_US
dc.contributor.affiliationTechnological University of the Shannon Midlands Midwesten_US
dc.contributor.sponsorAIT President Doctoral Scholarshipen_US
dc.identifier.doi10.1016/j.matpr.2022.03.197en_US
dc.identifier.orcidhttps://orcid.org/ 0000-0003-4247-0353en_US
dc.identifier.orcidhttps://orcid.org/ 0000-0003-2464-7258en_US
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessen_US
dc.subject.departmentFaculty of Engineering and Informatics TUS:MMen_US
dc.type.versioninfo:eu-repo/semantics/acceptedVersionen_US


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 International
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 International