Browsing Galway-Mayo Institute of Technology by Issue Date
Now showing items 1-20 of 328
-
Colonisation of artificially cleared Laminaria digitata (Huds.) Lamour. by the blue-rayed limpet Helcion pellucidum (L.) (Mollusca, Gastropoda)
(1996)The blue-rayed Helcion pellucidum is a herbivorous mollusc found on intertidal and sublittoral laminarian algae. -
Crustaceans and biodiversity crisis
(1998)Talitrid amphipod crustaceans were recorded at about 240 sites around ireland using both published records and recent seashore surveys. Five species were present, the beachfleas Orchestia gammarellus and O. mediterranea, ... -
Marine fauna of county Wexford, Ireland: the fauna of rocky shores and sandy beaches
(The Marine Institute, 1998)Information accumulated during 20 years of investigations on the coast of County Wexford is summarised. Topics include shore descriptions, faunal records, transectal surveys on rocky shores and sandy beaches, cryptofaunal ... -
Development of a method for the characterisation of the compliance and stiffness matrices of uncoupled laminates
(Galway-Mayo Institute of Technology, 1999)The mechanical behaviour of composite materials is defined by three matrices of stiffness/compliance : in-plane, flexure and coupling matrix between in-plane and flexure. The present work gives a method of test to ... -
Development of an expert system interface for the automated analysis of the sheet drawing metal forming process using finite element analysis techniques
(Galway-Mayo Institute of Technology, 1999)The objective of the work presented in this thesis was to develop an expert system for sheet metal forming. In doing so an examination, of implicit and explicit Finite Element Analysis (FE.A) codes and methodologies was ... -
A phytochemical study of ilex and betula species
(Galway-Mayo Institute of Technology, 1999)A phytochemical study of the outer bark of native common holly (Ilex aquifolium), led to the isolation and identification of nine novel fatty acid esters of the pentacyclic triterpene a-amyrin. These compounds were the ... -
Determination of selenium in selenium enriched yeast.
(Galway-Mayo Institute of Technology, 1999)Selenium, although a rare mineral, is widely distributed in minute amounts in virtually all materials of the earth’s crust, its average abundance is approximately ~0.09ppm. Selenium is rarely found in its native state i.e. ... -
Design of a bifurcated stent graft, with its accompanying delivery system.
(Galway-Mayo Institute of Technology, 2000)Abdominal Aortic Aneurysms (AAA) haemorhaging is a life-threatening disease. An aneurysm is a permanent swelling of an artery due to a weakness in its wall. Current surgical repair involves opening the chest or abdomen, ... -
Development of a design for the environment workbench software tool
(Galway-Mayo Institute of Technology, 2000)The research described in this thesis was developed as part of the Green Advisor for Concurrent Engineering (GACE) Project. The GACE Project was founded under the Applied Research Grants Scheme administered by Enterprise ... -
Optimisation of the structural design of a wind turbine
(Galway-Mayo Institute of Technology, 2000)The aim of this research is to examine the area of wind energy, in particular wind turbines. Then look at ways how the structural design of wind turbines can be improved and optimised. -
Spéciation of chromium in a chromium enriched yeast.
(Galway-Mayo Institute of Technology, 2000)The sample under investigation in this project is an experimental chromium enriched yeast used as a possible additive in animal foodstuff, which was produced by growing yeast in the presence of chromium (III) chloride. ... -
Computer integrated testing for the transport refrigeration systems industry.
(Galway-Mayo Institute of Technology, 2000)This is a study of a state of the art implementation of a new computer integrated testing (CIT) facility within a company that designs and manufactures transport refrigeration systems. The aim was to use state of the art ... -
A low cost free drifting position transmitter for the measurement of the thermocline properties
(Galway-Mayo Institute of Technology, 2000)This thesis describes the work undertaken in the conception o f a vehicle able to observe the thermocline, the temperature and the salinity from the sea surface to 200m deep. This work includes the mechanical design of the ... -
U-Kite development
(Galway-Mayo Institute of Technology, 2000)The Following thesis describes the work which was undertaken in the conception, development, and the construction of an open sea towed vehicle used to deploy a wide range of oceanographic monitoring equipment. This streamlined ... -
Development of an integrated approach to reliability management and operation
(Galway-Mayo Institute of Technology, 2001)The research described in this thesis has been developed as a part of the Reliability and Field Data Management for Multi-component Products (REFIDAM) Project. This project was founded under the Applied Research Grants ... -
Development of a life cycle management system for remote products.
(Galway-Mayo Institute of Technology, 2001)The research described in this thesis has been developed as a part of the Reliability and Field Data Management for Multi-Component Products (REFIDAM) Project. This project was funded under the Applied Research Grants ... -
The development of a construction and demolition waste recycling facility in Galway - a case study
(Galway-Mayo Institute of Technology, 2002)Construction and demolition waste is conservatively estimated to account for approximately 17.5 per cent of the total amount of non-agricultural waste produced in Ireland each year. The European Commission identified it ... -
Design, development and testing of a CAD integrated design for environment software tool.
(Galway-Mayo Institute of Technology, 2002)The research described in this thesis was developed as part o f the Information Management for Green Design (IMA GREE) Project. The 1MAGREE Project was founded by Enterprise Ireland under a Strategic Research Grant Scheme ... -
An integrated design and manufacture methodology for injection moulded components
(Galway-Mayo Institute of Technology, 2002)Traditionally, the uncertainties associated with the development of plastic injection moulded components resulted in a product development cycle of design, built and break. This sequential process adds considerable time ... -
Design and application of low speed wind tunnels
(2002)The goal of this article is to provide a short introduction to the design and application of low speed wind tunnels. These wind tunnels are designed to provide a well-defined, controllable, uniform flow of air for experimental ...