Search
Now showing items 1-10 of 13
Degradable nanocomposites for fused filament fabrication applications.
(MDPI, 2018-05-09)
There has been a substantial increase in the use and development of plastics over the
last century. However, due to ever-diminishing petroleum feedstocks and growing concern for the
environment, there has been a rise in ...
Formulation and evaluation of Fenbendazole extended-release extrudes processed by hot-melt extrusion
(MDPI, 2022-10-06)
This study aimed to demonstrate the feasibility of hot-melt extrusion in the development of
extended-release formulations of Fenbendazole (Fen) dispersed in PEO/PCL blend-based matrices.
Their thermal, physical, chemical ...
Review of multifarious applications of Poly (lactic acid)
(Taylor & Francis, 2016)
Poly (lactic acid) is considered to be a promising alternative to petroleum-based polymers due to its renewability, biodegradability, biocompatibility, and good mechanical properties. Because of the high cost, the applications ...
Lower critical solution temperature tuning and swelling behaviours of NVCL-based hydrogels for potential 4DF printing applications.
(MDPI, 2022-08-02)
The phase transitions of poly (N-vinyl caprolactam) (PNVCL) hydrogels are currently
under investigation as possible materials for biomedical applications thanks to their thermosensitive
properties. This study aims to use ...
Analysis of the mechanical properties of solvent cast blends of PLA/PCL.
(Trans Tech Publications, 2014-09)
Polylactic acid (PLA) is the most promising material in the biodegradable category. However, brittleness and poor thermal stability restrict its application. To overcome this limitation, PLA may be blended with other ...
Surface modified halloysite nanotubes reinforced polylactic acid for use in biodegradable coronary stents.
(Wiley, 2019-08)
Poly(lactic acid) (PLA) was reinforced halloysite nanotubes (HNTs) in this study. To improve dispersion and interfacial adhesion of HNTs within the PLA matrix, HNTs were surface modified with 3‐aminopropyltriethoxysilane ...
Additive manufacturing of personalized pharmaceutical dosage forms via stereolithography.
(MDPI, 2019-12-03)
The introduction of three-dimensional printing (3DP) has created exciting possibilities for
the fabrication of dosage forms, paving the way for personalized medicine. In this study, oral dosage
forms of two drug ...
Synthesis and characterization of high density polyethylene / peat ash composites.
(Elsevier, 2016-06)
A new type of polymer composite was synthesized from one industrial waste, peat ash, at varying mixing ratios of high density polyethylene (HDPE) and the resulting products were characterized using different experiments ...
Halloysite nanotube reinforced polylactic acid composite.
(Wiley, 2017-10)
Polylactic acid (PLA) has long history in medical applications, and reinforced PLA has the potential to be used in the medical applications that require high mechanical strength such as coronary stents and bone fixation ...
A development of new material for 4D printing and the material properties comparison between the conventional and stereolithography polymerised NVCL hydrogels
(MDPI, 2022-11-22)
The term 4D printing refers to the idea that the shape or properties of a printed object can be
changed when an external stimulus is applied. In this contribution, a temperature-responsive polymer
Poly (N-vinyl caprolactam) ...