Browsing Articles - PRISM: Polymer, Recycling, Industrial, Sustainability and Manufacturing Institute by Title
Now showing items 42-61 of 169
-
Effect of anodizing time on the mechanical properties of porous titania coatings formed by micro-arc oxidation.
(Elsevier, 2017-01-15)Porous TiO2 coatings were produced on commercially pure Ti substrates by micro-arc oxidation (MAO) in 1.0 M H2SO4 electrolyte for different anodizing times. Their mechanical properties were assessed by means of instrumented ... -
Effect of Chemical Treatments and HDPE-g-MA on the physical and mechanical behaviour of HDPE/ natural fibre composites.
(2013)Many authors have reported on the use of natural fibres (raw or chemically modified) as reinforcing elements for high density polyethylene (HDPE). These materials have generated a lot of interest due to their low cost ... -
The effect of cooling on the degree of crystallinity, solid-state properties, and dissolution rate of multi-component hot-melt extruded solid dispersions.
(MDPI, 2020-03-01)The effect of cooling on the degree of crystallinity, solid-state and dissolution properties of multi-component hot-melt extruded solid dispersions [SD] is of great interest for the successful formulation of amorphous ... -
Effect of cullulose size-concentration on the structure of polyvinyl alcohol hydrogels.
(Elsevier, 2020-06-11)Microfibrillated cellulose as a reinforcement agent has been investigated extensively due to their unique characteristics, which can reorder the structure of polymers and hydrogels leading to improved mechanical properties ... -
Effect of mechanical recycling on the mechanical properties of PLA-based natural fiber-reinforced composites
(MDPI, 2023-04-06)The present study investigates the feasibility of utilizing polylactic acid (PLA) and PLAbased natural fiber-reinforced composites (NFRCs) in mechanical recycling. A conical twin screw extrusion (CTSE) process was utilized ... -
Effect of stereolithography 3D printing on the properties of PEGDMA hydrogels.
(MDPI, 2020-09-03)Stereolithography (SLA)-based 3D printing has proven to have several advantages over traditional fabrication techniques as it allows for the control of hydrogel synthesis at a very high resolution, making possible the ... -
Effect of thermal annealing on a bilayer polyvinyl alcohol/polyacrylic acid electrospun hydrogel nanofibres loaded with doxorubicin and clarithromycin for a synergism effect against osteosarcoma cells
(Elsevier, 2021-08-02)Polyvinyl alcohol/polyacrylic acid (PVA/PAA) bilayer hydrogel nanofibres were successfully fabricated by electrospinning and physically crosslinked via heat treatment. The effects of the thermal annealing process on the ... -
Effect of unidirectional freezing using a thermal camera on polyvinyl (alchohol) for aligned porous cyrogels.
(Taylor & Francis Online, 2020-03-18)Unidirectional freeze casting for polymers and ceramics has been performed extensively; however, the mechanisms involved in unidirectional freezing are not thoroughly understood and therefore, in this study, polyvinyl ... -
Electrospun drug-loaded and gene-loaded nanofibres: the holy grail of glioblastoma therapy?
(MDPI, 2023-06-03)To date, GBM remains highly resistant to therapies that have shown promising effects in other cancers. Therefore, the goal is to take down the shield that these tumours are using to protect themselves and proliferate ... -
Enhanced antimicrobial activity of biocompatible bacterial cellulose films via dual synergistic action of curcumin and triangular silver nanoplates
(2022-10-13)Curcumin and triangular silver nanoplates (TSNP)-incorporated bacterial cellulose (BC) films present an ideal antimicrobial material for biomedical applications as they afford a complete set of requirements, including a ... -
Enhancement of mechanical properties and wettability of TiO2NT arrays formed in simulated body fluid‐based electrolyte.
(Wiley, 2019-09-13)Modified titanium nanotubes (TiO2NTs) coatings are grown in simulated body fluid (SBF) from Ticp and Ti6Al4V. The addition of 1% v/v of SBF to the electrolyte neither modifies film morphology nor the structural oxide ... -
Enhancement of scaffold in vivo biodegradability for bone regeneration using P28 peptide formulations
(MDPI, 2023-06-13)The field of bone tissue engineering has shown a great variety of bone graft substitute materials under development to date, with the aim to reconstruct new bone tissue while maintaining characteristics close to the ... -
An ensemble machine learning method for microplastics identification with FTIR spectrum
(Elsevier, 2022-06-20)Microplastics (MPs) (size < 5 mm) marine pollution have been investigated and monitored by many researchers and found in many coasts around the world. These toxic chemicals make their way into human diet through food ... -
Enzymatic activities and analysis of a mycelium-based composite formation using peach palm (Bactris gasipaes) residues on Lentinula edodes.
(Research Square, 2020-08-03)By seeding fungus on top of industry residues, a mycelium can grow and form a compacted network structure, producing a material whose properties can be quite similar to polystyrene. However, depending on the source used, ... -
Evaluation and characterisation of urinary catheter coating utilising Hansen solubility parameters and FEA analysis.
(Elsevier, 2015-08-15)This work investigated the Hansen solubility parameters required to optimise a functional polyurethane base coat as an attachment for a lubricious polyvinyl pyrrolidone coating for polyvinyl chloride urinary catheters. ... -
Evaluation of the early in vivo response of a functionally graded macroporous scaffold in an osteochondral defect in a rabbit model.
(Springer, 2016-05)Cartilage tissue engineering is a multifactorial problem requiring a wide range of material property requirements from provision of biological cues to facilitation of mechanical support in load-bearing diarthrodial joints. ... -
The evaluation of the potential ecotoxicity of pyroligenous acid obtained from fast pyrolsis.
(Elsevier, 2019-09-30)Pyroligneous acid (PA) is a by-product of bio-oil, which is obtained by pyrolysis of the wood. This product has been tested for use in several areas, such as agriculture, as a promising green herbicide; however, there are ... -
Evaluation of titanium nitride coatings in bandsaw blades for wood splitting by cold plasma
(Taylor & Francis, 2021-11-06)Due to the advances in surface treatments, it is possible to obtain excellent cutting tools. However, the field for wood cutting tools still needs to be further investigated. In this work, titanium nitride was deposited ... -
Exploring microorganisms from plastic-polluted sites:unveiling plastic degradation and PHA production potential
(2023-12-03)The exposure of microorganisms to conventional plastics is a relatively recent occurrence, affording limited time for evolutionary adaptation. As part of the EU-funded project BioICEP, this study delves into the plastic ... -
Extended release of proteins following encapsulation in hydroxyapatite/chitosan composite scaffolds for bone tissue engineering applications.
(Elsevier, 2018-03)Highlights: Biocompatible, mechanically robust scaffold with an appropriate stability for bone healing when used with fixation device. Proteins can be covalently attached to the scaffold. Proteins are released for an ...