Browsing Research, Innovation & Enterprise by Title
Now showing items 1-20 of 482
-
3D printed end of arm tooling (EOAT) for robotic automation.
(MDPI, 2018-09)This research furthers the practice of designing and manufacturing End of Arm Tooling (EOAT) by utilizing a low cost additive manufacturing Fused Filament Fabrication (FFF) technique to enable tool weight saving and ... -
3D printed end of arm tooling (EOAT) of a robotic arm
(Athlone Institute of Technology, 2018-04-24)This research furthers the practice of designing and manufacturing an EOAT for low weight applications by utilising additive manufacturing (“3D Printing”) techniques to decrease energy consumption via tool weight savings ... -
3D printed polymers are less stable than injection moulded counterparts when exposed to terminal sterilization processes using novel vaporized hydrogen peroxide and electron beam processes.
(Elsevier, 2019-11-21)There is an increasing trend for use of 3D printing processes in healthcare due in part to emergence of customised medical devices and associated low manufacturing cost. However, there is a dearth of knowledge on the ... -
3D printing of photocurable resin reinforced by functionalised graphene nanoplatelets
(MDPI, 2023-05-05)The influence of functionalised graphene nanoplatelets with melamine on the thermal and mechanical properties of a 3D-printed photopolymerisable resin is investigated. In this work, a liquid-based 3D printer and stereolithography ... -
Access control policy enforcement for zero-trust-networking.
(IEEE, 2018-06)The evolution of the enterprise computing landscape towards emerging trends such as fog/edge computing and the Industrial Internet of Things (IIoT) are leading to a change of approach to securing computer networks to deal ... -
Achieving sustainability of the seafood sector in the European Atlantic area by addressing eco-social challenges: the NEPTUNUS Project.
(2022-03-05): Fisheries and aquaculture are becoming a focus of societal concern driven by globalization and increasing environmental degradation, mainly caused by climate change and marine litter. In response to this problem, the ... -
Adaptive perceptual block compressive sensing for compression.
(Institute of Electronics, Information and Communication Engineers, 2016-06)Because the perceptual compressive sensing framework can achieve a much better performance than the legacy compressive sensing framework, it is very promising for the compressive sensing based image compression system. In ... -
An adaptive policy approach to video quality assurance.
(IEEE, 2018-12)Video in all its forms is probably the most important service carried on networks today and few would argue that video quality assurance is one of the most daunting network management challenges. Quite often, video ... -
Additive manufacturing of personalized pharmaceutical dosage forms via stereolithography.
(MDPI, 2019-12-03)The introduction of three-dimensional printing (3DP) has created exciting possibilities for the fabrication of dosage forms, paving the way for personalized medicine. In this study, oral dosage forms of two drug ... -
Additive manufacturing of PLA/HNT nanocomposites for biomedical applications
(Elsevier, 2019)Additive manufacturing has been of great interest of research in various applications due to their ease in processability, cost effectiveness and adaptability. In this study Poly Lactic Acid (PLA) was used as the base ... -
Addressing challenges and opportunities of the European seafood sector under a circular economy framework.
(Elsevier, 2020-02)The European seafood and aquaculture sectors are facing important challenges in terms of environmental threats (climate change, marine debris, resources depletion), social development (worker rights, consumer's awareness) ... -
Affective computing using speech and eye gaze: a review and bimodal system proposal for continuous affect prediction.
(2018)Speech has been a widely used modality in the field of affective computing. Recently however, there has been a growing interest in the use of multi-modal affective computing systems. These multi-modal systems incorporate ... -
Age and gender influences on perceived olfactory and visual media synchronization.
(IEEE, 2013)Lately, significant efforts have being put into proposing various solutions for increasing multimedia viewers’ perceived quality levels. One innovative avenue is to enhance users’ quality of experience (QoE) by extending ... -
Alfa fiber/polypropylene composites: Influence of fiber extraction method and chemical treatments.
(Wiley, 2019-01)Alfa fiber/polypropylene composites were manufactured using twin-screw extrusion. Fibers were extracted following alkaline and steam explosion methods. Three chemical treatments were also applied to alkaline extracted ... -
Alveolar macrophage chromatic is modified to orchestrate host response to Mycobacterium bovis infection.
(Frontiers, 2019-02-07)Bovine tuberculosis is caused by infection with Mycobacteriumbovis, which can also cause disease in a range of other mammals, including humans. Alveolar macrophages are the key immune effector cells that first encounter ... -
Analg front-end design design for biomedical signal acquisition systems.
(Springer, 2019)This manuscript contains a brief overview of the work being carried out by the author under the aegis of Visvesvaraya Young Faculty Research Fellow- ship awarded to him by the Ministry of Electronics and Information ... -
An analysis of alterations to the SCTP RTO calculation mechanism for WLAN environments
(Springer, 2008-01)As a connection oriented transport layer protocol the Stream Control Transmission Protocol (SCTP) inherits many of the features of the Transmission Control Protocol (TCP) including the mechanism by which Retransmission ... -
Analysis of iterative process for Nauru voting system
(Tech Science Press, 2021)Game theory is a popular area of artificial intelligence in which the voter acknowledges his own desires and favors the person he wants to be his representative. In multi-agent systems, social choice functions help ... -
Analysis of the mechanical properties of solvent cast blends of PLA/PCL.
(Trans Tech Publications, 2014-09)Polylactic acid (PLA) is the most promising material in the biodegradable category. However, brittleness and poor thermal stability restrict its application. To overcome this limitation, PLA may be blended with other ... -
Anomalous distributed traffic: detecting cyber security attacks amongst microservices using graph convolutional networks
(Elsevier, 2022-04-22)Currently, microservices are trending as the most popular software application design architecture. Software organisations are also being targeted by more cyber-attacks every day and newer security measures are in high ...
